For deck and fence painting process, The 6IX Paint company provides flawless and quality treatment. In particular, the drying and polishing process is as important as painting the decks to keep the surface smooth. Therefore, it should be done by the competent person. You are at the right address for affordable deck and fence painting. You will be satisfied with the service you receive.
Steps Applied in Painting Works
In the deck and fence painting process, while the old colors are attached to the metal surfaces of the repainted places, the place to be painted should be properly prepared before the painting process. The steps for this are:
After the first coat of paint is painted thinly, it is expected to dry completely. The paint will not last that long if the first coat is not allowed to dry completely. After the second coat of paint is applied to the surface, care is taken to apply the paint evenly. The second floor will make the project look its best when completed. This also provides extra protection and stays on metal longer. Besides that, acrylic paint is waterproof, so multiple layers can be used to achieve different colors. When applying multiple coats, the base coat should be allowed to dry completely before applying a new coat.
After painting the decks and fences, the drying times of the paints vary. Drying time should be taken into account when painting. Weather planning should also be done during paint application. Surface arrangement should be done before painting. First of all, attention is paid to the cleanliness of its surfaces In scraping, it is the process of completely removing nicks, scratches and dirt on the surface to be painted. All foreign bodies must be removed from the surface. The surface to be coated should then be dedusted by sweeping or air entrainment. The surface must then be cleaned again. The rust and dust free surface can be painted later.
Painting is recommended when the air temperature is 10 to 30 degrees. Make sure the painted area is completely dry. If a second coat is to be applied, dust adhering to the surface must be removed.
